Re: SSTC hits 66"

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: Liviu Vasiliu <teslina-at-yahoo-dot-com> 

Awsome Dan!!
And your pictures are great. Are they taken on the
film or with a digital camera?
The PCB boards will be avalaible to order?

teslina
 >
 >
--- Tesla list <tesla-at-pupman-dot-com> wrote:
 > Original poster: "Eastern Voltage Research
 > Corporation" <dhmccauley-at-easternvoltageresearch-dot-com>
 >
 >
 > I just finished my new PSSTC (Pulsed SSTC) and have
 > hit 66" so far with
 > minimal tuning and pretty shoddy primary tank wires
 > (12 AWG).
 >
 > Specifications from these photos:
 > DC Bus Voltage:  335VDC
 > Primary Capacitor:  0.11uF, 12kV MMC
 > Fres:  111 kHz
 > Pulsewidth:  250us
 > PRF:  100 Hz
 >
 >
 > The whole webpage describing my coil can be seen
 > here:
 > http://www.easternvoltageresearch-dot-com/sstccoil05.htm
 >
 > Arc photo prior to my full-bridge blowing up.  (See
 > secondary to primary arc
 > which initiated failure)
 > Distance from toroid to right wall is approximately
 > 70 inches.
 >
http://www.easternvoltageresearch-dot-com/images/isstc_arcs_bwtitle.jpg
 >
 > Full size arc photo of BW above (color)
 >
http://www.easternvoltageresearch-dot-com/images/isstc_arcs_fullsize01.jpg
 >
 > 55 inch POWER STRIKE to ceiling
 >
http://www.easternvoltageresearch-dot-com/images/isstc_arcs05.jpg
 >
 >
 > Dan
 >
 >