[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Homemade coil winding lathe

To: tesla-at-pupman-dot-com
Subject: Homemade coil winding lathe
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Sun, 29 Feb 2004 16:02:49 -0700
Resent-Date: Sun, 29 Feb 2004 16:10:39 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <taAr3.A.eaD.sFnQAB-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Hydrogen18" <hydrogen18-at-hydrogen18-dot-com> 

<http://www.hydrogen18-dot-com/articles/winding_lathe/>http://www.hydrogen18-dot-com/articles/winding_lathe/

I made a coil winding lathe today, looks to be promising. I'm a bit too 
tired to wind it today considering I wired the garage for 240 VAC at 30 
amps and built this lathe in under 2 hours. Can any1 see any flaws in my 
design?


-

Prev by Date: Re: Herrick's Transformerless Tesla Coil
Next by Date: RE: Gap Question
Prev by thread: Re: Homemade coil winding lathe
Next by thread: Re: Homemade coil winding lathe
Index(es):
- Date
- Thread