[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Can I run my Cockraft walton voltage multiplier of 2500-0-2500?

To: tesla-at-pupman-dot-com
Subject: Can I run my Cockraft walton voltage multiplier of 2500-0-2500?
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Fri, 19 Mar 2004 17:57:03 -0700
Resent-Date: Fri, 19 Mar 2004 18:10:26 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <349qwC.A.FiB._n5WAB-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Hydrogen18" <hydrogen18-at-hydrogen18-dot-com> 

I got a 5000 volt NST today and I want to power my 4x voltage multiplier 
off it. I know I can just use half but I was wondering if I can connect the 
other lead where ground usually goes on the multiplier circuit.  It works 
fine off of 5000 volts from 2 MOTs in series.

---Eric

Prev by Date: early rotary gap
Next by Date: Re: MMC CAPS
Prev by thread: Re: early rotary gap
Next by thread: Re: Can I run my Cockraft walton voltage multiplier of 2500-0-2500?
Index(es):
- Date
- Thread