Re: Magnetic gap experiment (was RE: Magnetic quenching.)

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Richard Modistach" <hambone-at-dodo-dot-com.au> 


----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Wednesday, March 17, 2004 1:59 AM
Subject: Magnetic gap experiment (was RE: Magnetic quenching.)


 > Original poster: Marco.Denicolai-at-tellabs-dot-com
 >
 > Hi Dave,
 >
 >  > I used standard brass brazing rods with flux.
 >
 > Being a beginner too, I suppose you mean the usual rods used for
 > plumbing with copper pipes, right?
 >

wrong, plumbers use a type of silver solder, much different from bronze
brazing rod.

regards
richard
aus