[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

more RFI filter questions



Original poster: "steve" <steve_vance-at-cablelynx-dot-com> 

Hi List,

I have bought four Corcom 30vsk6 filters off of  ebay. They are rated 30A
250V. I would like to use them on my 5KVA pig powered coil. I have searched
the archives for answers to my questions but all I can find out is that
there is a lot of disagreement on the subject of connecting RFI filters.
So....Here we go again.  Do they work better if they are hooked up
backwards? Will placing two filters in parallel lower the attenuation to a
more useful level for tesla coil frequencies? Do I ground the filter cases
to the mains ground or do I use the coil's RF ground?

Thanks,
Steve Vance