Re: Self-Resonant Driver Boards (DRSSTC, ISSTC, etc...) Bulk Purchase ? ? ? ? Anyone ? ? ?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jim Mitchell" <Electrontube-at-sbcglobal-dot-net> 

Not only that Dan, if you have the ON time too long or the OFF time too
short,  you might burn everything up!
It might be a good idea to include some sort of limiter.

Regards - Jim Mitchell
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Sunday, June 20, 2004 11:48 PM
Subject: Re: Self-Resonant Driver Boards (DRSSTC, ISSTC, etc...) Bulk
Purchase ? ? ? ? Anyone ? ? ?


 > Original poster: "Eastern Voltage Research Corporation"
<dhmccauley-at-easternvoltageresearch-dot-com>
 >
 > Oh . . .
 >
 > One thing i forgot to mention is that there will be a MAX DUTY CYCLE
 > detection circuit on this board.
 > This is important as if you try to run pulses to wide or PRF's too high,
you
 > may have a duty cycle that is too high
 > and will cause the gate drivers to burn up very quickly.
 >
 > Dan
 >
 >
 >