[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: SSTC dead times

Original poster: herwig.roscher-at-gmx.de 

Sean Taylor wrote:
 > A good way to test the dead time is to run the bridge with a
 > resistive load, and put a resistor in series with the supply
 > to the bridge.


This is exactly, what I have done.

 > the waveforms will change with applied input voltage, as the effective
 > gate capacitance will change, and the gate waveform will change.
This I have stated as well and it was the reason for my question. Now
I shall repeat the measurements using  the full supply voltage.

Thank you Sean.