[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Bleed resistors for MMC caps
Original poster: Chris Cudahy <ccudahy-at-yahoo-dot-com>
I'm collecting parts for an MMC cap. I've going with
942C20P15K's for the caps but I'm not sure what to use
for bypass resistors. The 1/2 watt 10M ohm seems to be
reasonable but I can't find a resistor rated for 2000
volts - 350normal/700max is the most I can find.
Which leaves me with 2 options:
a) Wire up 3 3.3M Ohm resistors in series across each
cap. Hit just under the max overload voltage of 2100V
b) Wire one 10M Ohm resistor, (someone has mentioned
10MH-ND) and wait for smoke.
I'd rather not have to wire 3 resistors to each cap,
has anyone had any failures with option b?
(BTW, what the heck is the point of making a 0.5 watt
resistor in 10M ohm if it's limited to 0.12 watts by
it's working voltage?)