Testing Ground. Re: An Electrolytic ground plane

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: davep-at-quik-dot-com 


 > Here's another real basic question that I'm remiss in not knowing but
 > what  is the best test to determine the 'quality' of said ground plane?
 > Only  after this tested 'upgrade' can I then feel comfortable in testing
 > the DeoxIt. John
     There are a variety of test methods, some of which are in the list
     archives.  Many of them concentrate on 60Hz performance, all
     are more or less complicated.  As one who tends towards the
     view that 'a good ground' helps. I have to say that the best
     test is to do it and run the coil and see.  ...AND that its
     real easy to put more effort into super improving 'a good ground'
     than is strictly justified by the results.

     Or so i THINK from watching the comments here over some years.

     best
      dwp