Re: Turns to secondary length ratio...

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: Brett Miller <brmtesla2-at-yahoo-dot-com> 

Hydrogen,

That would depend on your wire diameter.  You would
need to know wire gauge, covering type and build.

Ed Sonderman's spreadsheet will get you in the ball
park, plus you can calibrate it for your specific wire
type if neccessary.

Also a great place (but somewhat expensive...I think
worth it) to get wire is Wiretronic --
www.wiretron-dot-com.  They have an .exe you can download
which does wire calculations as well, so you can
determine how much you need before you order.

-Brett
www.hot-streamer-dot-com/brett


--- Tesla list <tesla-at-pupman-dot-com> wrote:
 > Original poster: "Hydrogen18"
 > <hydrogen18-at-hydrogen18-dot-com>
 >
 > How long should a 3 inch secondary be for 1200
 > turns?
 >
 >