[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Over Saturation?

To: tesla-at-pupman-dot-com
Subject: RE: Over Saturation?
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Tue, 27 Jan 2004 22:44:04 -0700
Resent-Date: Tue, 27 Jan 2004 22:47:09 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <p9BCP.A.JBC.bz0FAB-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Philip Chalk" <phil-at-apsecurity-dot-com.au> 

-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com]
Sent: Wednesday, 28 January 2004 1:53 AM
To: tesla-at-pupman-dot-com
Subject: Over Saturation?

Original poster: "Randy & Lori" <rburney6-at-comcast-dot-net>

Why does my Variac (powered up) give me 0 volts difference of
potential when an ohm meter tells me 0 ohms?  me.

Randy
Savannah, GA

Huh ??

Well, for a start,  V = I.R   If R=0, then V=0

But I know that's not you mean - I don't get what you're trying to ask ?

Phil C.

Prev by Date: Need Power Supply Schematic
Next by Date: Re: SSTC Driver Output Cable Lengths (Distance from Driver to Resonator)
Prev by thread: Re: Over Saturation?
Next by thread: RE: Over Saturation?
Index(es):
- Date
- Thread