[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: MOT coil does not light
Original poster: "Aaron Aab" <striker754-at-earthlink-dot-net>
Sigh.......
Each side of the MOT stack produced a nice big arc that wouldnt go out until
6-8 inchies away from the lug.
However, put the 2 stacks together with the individual MOTs hooked up to the
phase they worked on before, and you only get a spark when you short one of
the HV terminals to gnd or the other HV terminal.
They were some hefty arcs when I have the 2 MOTs, but disappointment when
stacked in 4.
I even tried running them on one phase of 120V by using a jumper wire. No go
there either, just a spark.
Now what to do??
*snip*