RE: Specs inquiry for all

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: Terry Fritz <teslalist-at-twfpowerelectronics-dot-com>

Perhaps this data would be of some help:

http://www.classictesla-dot-com/download/tc99-95.zip

It is where a bunch of people sent in coil specs.

Cheers,

         Terry

At 05:12 PM 1/27/2004, you wrote:
>The data base at the geekgroup is not going to meet my needs.  :(
>
>There has to be more than just two people that have coils that fit into
>my crieteria.
>I just know it.
>Any one else have input for me
>I need it.
>
>thanx
>Luke Galyan
>Bluu-at-cox-dot-net
>
>-----Original Message-----
>From: Tesla list [mailto:tesla-at-pupman-dot-com]
>Sent: Monday, January 26, 2004 9:49 PM
>To: tesla-at-pupman-dot-com
>Subject: Re: Specs inquiry for all
>
>Original poster: Mark Broker <mbroker-at-thegeekgroup-dot-org>
>
>We have started an online Tesla Coil spec database:
>
>http://www.thegeekgroup-dot-org/tcdb/
>
>I don't think many people have been using it, nor do I think any more
>coding has gone on to improve the dB....  But it's there :)
>
>Regards,
>
>Mark Broker
>Chief Engineer, The Geek Group
>
>
>On Mon, 26 Jan 2004 08:01:20 -0700, Tesla list <tesla-at-pupman-dot-com> wrote:
>
> >Original poster: "Luke" <Bluu-at-cox-dot-net> I was wondering if anyone has
>built
> >a system that works well and then changed to a Single toroid for the
>top
> >that was large enough that it prevented break out when no break out
>point
> >was provided.  Or anyone that has designed a system that tunes up and
> >works good but need a break out point to get their system to break out,
>
> >again, using a single toroid as the top load.
> >
> >I am sure there are those out there that have done this.
> >
> >Would such people be willing to respond with some specs of their
>systems?
> >Here are the sats I specifically want to see:
> >Oh and these systems have to be using a cap that is NOT the resonant
>size
> >with the supply transformer and they have to have had the safety gap or
>
> >main gap set so that no more than the supply transformers peak voltage
> >could be obtained before spark gap firing.
> >
> >1          Supply transformer peak voltage or rms but please stat which
>
> >you are giving
> >2          Capacitor size
> >3          secondary number of turns
> >4          secondary length (not coil form but the wire wound portion)
> >5          secondary diameter
> >6          secondary wire gauge
> >7          Toroid minor diameter
> >8          toroid major diameter
> >9          toroid surface ( smooth or corrugated or otherwise)
> >
> >No need for spark gap type or firing rate, although I would be
>interested
> >to see just for curiosity sake.
> >
> >Hope to hear from as many people as possible that fit this description.
> >If I am unclear as to what I am asking for feel free to make me explain
>
> >further.
> >
> >Thanx
> >Luke Galyan
> >Bluu-at-cox-dot-net
> >
> >