Re: Wiring MOTs

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Malcolm Watts" <m.j.watts-at-massey.ac.nz> 

On 24 Jan 2004, at 19:15, Tesla list wrote:

 > Original poster: "Hydrogen18" <hydrogen18-at-hydrogen18-dot-com>
 >
 > Ok, I'm no genius on electronics but know a good bit. Heres how I
 > would do it. Ground the first core. Take the high voltage output wire
 > of that one, connect it to the core of the next. Then take the high
 > voltage wire coming out of that one and connect it to the core of the
 > next. The ground core will be your 0 volts, the final high voltage
 > wire will be your high voltage out.

I suggest that you try your approach before recommending it to
others. On the face of it it appears that potential difference
between the primary windings and cores of succeeding transformers has
been overlooked.

Malcolm
<snip>