Re: Grounding the Secondary Coil Help please

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Aaron Aab" <striker754-at-earthlink-dot-net> 

I drilled a hole, fed the wire through to a lug on the inside, put a bolt
through it, then put a lug on the bottom


----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Monday, January 19, 2004 10:52 PM
Subject: Grounding the Secondary Coil Help please


 > Original poster: "Nightmare" <nightmare-at-bak.rr-dot-com>
 >
 >     Hi, this is Ravi again, and i am almost done with my first TC, 7.5kV
 > 30mA, 3inX22in sec. I wanted to know some different ways to ground the
 > secondary because i couldnt find a grounding strap. Could i drill a hole
at
 > the bottom of secondary and attatch  the wire with a nut and bolt? Please
 > give me some ideas, i couldnt think of any other good ways.
 >
 > Thanks for the help
 >
 > Ravi
 >
 >