[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Data Acquisition



Original poster: Thomas <tom-at-pwrcom-dot-com.au> 

Not sure about the text but the schematic is alot clearer in the old version
(it wont open in the web page though):

http://www.webclot-dot-com/high_volt/fieldmill.zip

Tom L.

-------------------------------------------

Original poster: "David Thomson" <dave-at-volantis-dot-org>

Hi Tom,

Yes, I copied the three pages that were on the SCIAM site into a MS Word
document and noticed all three pages had chopped text.  If you have the
full
text I would like to see the link to it.

Dave

  > -----Original Message-----
  > From: Tesla list [mailto:tesla-at-pupman-dot-com]
  > Sent: Monday, January 19, 2004 7:14 PM
  > To: tesla-at-pupman-dot-com
  > Subject: RE: Data Acquisition
  >
  >
  > Original poster: Thomas <tom-at-pwrcom-dot-com.au>
  >
  > I just noticed that SA have cut the third page short. I have the
schematic
  > for the field mill electronics and can post a link to it tonight if
you
  > like.
  >
  >  > Original poster: Thomas <tom-at-pwrcom-dot-com.au>
  >  >
  >  > This might be handy too:
  >  >
  >  > http://www.sciam-dot-com/article.cfm?articleID=00000ED3-69CA-1C72-
  >  > 9EB7809EC588F2
  >  > D7
  >  >
  >  > It's a DIY field mill for measuring electric fields. It will
  >  > give you a good
  >  > ambient reference.
  >  >
  >  > Tom L.
  >  >
  >  >