[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Polished Copper Sphere for VDG, TC, or...?

To: tesla-at-pupman-dot-com
Subject: Polished Copper Sphere for VDG, TC, or...?
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Mon, 19 Jan 2004 22:51:44 -0700
Resent-Date: Mon, 19 Jan 2004 23:03:33 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <IRBMQD.A.AvC.mSMDAB-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: Gregory Hunter <ghunter31014-at-yahoo-dot-com> 

I found this while browsing the web:

http://www.gardeners-dot-com/sell.asp?ProdGroupID=14929&DeptPGID=16566&lstCategory=16567&lstSort=0&PFImage=1&RecGroupNum=4&SC=CNA90001

It is a 10" or 12" polished copper sphere with a neat
access hole already cut in it. Could be just the
ticket for a homebrew VDG. Might make a really cool
looking TC terminal too.

Regards,

=====
Gregory R. Hunter

http://hot-streamer-dot-com/greg

_

Prev by Date: Re: SSSSTC Coil questions for Mr. Steve
Next by Date: RE: Data Acquisition
Prev by thread: Re: Secondary Grounded NST Questions
Next by thread: RE: Polished Copper Sphere for VDG, TC, or...?
Index(es):
- Date
- Thread