Re: secondary coilform painting

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Gerry Reynolds" <gerryreynolds-at-earthlink-dot-net> 

What if the coilform is acrylic or some other non absorbing plastic?

Gerry R

 > Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com>
 >
 >
 > Yes, you are correct.  The entire coilform should be sanded inside and
 > outside, and then coated with 3 coats of G.E. Glyptal (motor rewind shop)
 > allowing each coat to dry 24 hrs.
 >
 > This totally seals the tube and prevents high freq tracking which can
occur
 > at TC frequencies.
 >
 > Dr. Resonance
 >
 > Resonance Research Corporation
 > E11870 Shadylane Rd.
 > Baraboo   WI   53913