RE: SRSG Alignment

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Lau, Gary" <gary.lau-at-hp-dot-com> 

Yes, and I had scoped the NST secondary current at something like 160mA
RMS!  I always run with the volume set to "11".  So the NST was probably
seeing between 130-140VAC, pulling in excess of 20A from the wall, tank
cap was .02uF.

Gary Lau
MA, USA


Original poster: Terry Fritz <teslalist-at-twfpowerelectronics-dot-com>

Hi Gary,

What is the NST input voltage and primary cap size?

Is this is that coil we thought was saturating the shunts in the NST?

Cheers,

          Terry

At 07:53 PM 1/18/2004, you wrote:
 >I've had up to 60" coming of my coil with just one 15/60 NST and a
 >static gap.  I would definitely recommend starting with a static gap,
 >there's always tomorrow.
 >
 >Regards, Gary Lau
 >MA, USA