RE: SRSG Alignment

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Luke" <Bluu-at-cox-dot-net> 

I am wanting to get 36" - 40" arcs from my coil.
I will be using one NST 15KV at 60MA
I know I could go to a static gap and just bump up to 2 NST's.
But I got interested in this TC stuff again and want to use just one and
shoot for the high 40's" sparks on just the single NST.

I just got interested and wanted to learn more about it.  So I decided
to not only get the arcs I want but have a coil that is working at good
efficiency as compared to the norm out there.  Not looking to set any
records but would like to proud of getting the arc length per power
input.  So I was looking into the SRSG to accomplish this while learning
a bit at the same time.

Luke Galyan
Bluu-at-cox-dot-net

-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com]
Sent: Sunday, January 18, 2004 5:02 PM
To: tesla-at-pupman-dot-com
Subject: Re: SRSG Alignment

Original poster: Finn Hammer <f-h-at-c.dk>

Luke,

What _are_ you trying to accomplish?

Cheers, Finn Hammer

Tesla list wrote:
 >Original poster: "Luke" <Bluu-at-cox-dot-net>
 >Thanx
 >I am still deciding which way to go on that.
 >If I can I would like to use the SRSG.
 >Need to see if its worth the work for what I am trying to accomplish.
 >
 >Luke Galyan
 >Bluu-at-cox-dot-net
snip