[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Aluminum tape on toroids? What about the sticky side being nonconducting? Not a problem!

To: tesla-at-pupman-dot-com
Subject: Re: Aluminum tape on toroids? What about the sticky side being nonconducting? Not a problem!
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Fri, 09 Jan 2004 20:15:20 -0700
Resent-Date: Fri, 9 Jan 2004 20:22:20 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <5wGSXD.A.OEH.e_2__-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: dave pierson <davep-at-quik-dot-com> 

1) corona at the edges will become conducting, as voltages go up.
    Can't speak tot he losses inherent in this mode...)

2) _conductive_ adhesive metallic tapes are available, tho
not widely, and, i suspect, not cheaply.  (and i don't know exactly HOW
conductive the adhesives used are...).  Such tape is used
in emi/rfi test etc...

    best
     dwp

Prev by Date: RE: Variac and stationary gap TCs
Next by Date: Re: IS 240VAC two-phase - NO
Prev by thread: RE: Variac and stationary gap TCs
Next by thread: RE: Aluminum tape on toroids? What about the sticky side being nonconducting?
Index(es):
- Date
- Thread