[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: filling toroids

To: tesla-at-pupman-dot-com
Subject: Re: filling toroids
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Fri, 09 Jan 2004 07:46:10 -0700
Resent-Date: Fri, 9 Jan 2004 07:51:18 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <_GzeDB.A.sdE.a_r__-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "harry" <harry-at-prcn-dot-org> 


----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: January 8, 2004 10:37 AM
Subject: Re: filling toroids


 > Original poster: Yurtle Turtle <yurtle_t-at-yahoo-dot-com>
 >
 > I once did one with drywall mud. Rather than sanding,
 > I used a damp sponge. Got a real good finish. Mine was
 > only 4" x 20" or so. A larger one may crack if flexed.
 >
 > Adam
 >


Try adding some Weldbond glue to the mix works great in plaster

Prev by Date: Re: Presentation and criticism on the list
Next by Date: RE: Aluminum tape on toroids? What about the sticky side being nonconducting?
Prev by thread: RE: filling toroids
Next by thread: Re: filling toroids
Index(es):
- Date
- Thread