Re: Ballast

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "claude masetto" <claudmas-at-optusnet-dot-com.au> 

Thanks Peter. I think I will try it. You live a bit too far away for me.
Claude.
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Sunday, January 04, 2004 2:15 PM
Subject: RE: Ballast


 > Original poster: "Peter Reid" <peter-at-reidconsulting-dot-com.au>
 >
 > Claude,
 >
 > Yes it certainly will work well for a 4xMOT supply, however you may want
 > to have a few more turns on the ballast, so you can limit the input
 > current a bit more.
 >
 > I live in Toowoomba, that's about 130km West of Brisbane in Queensland.
 >
 > Regards
 > Peter Reid.
 >
 >
 > -----Original Message-----
 > From: Tesla list [mailto:tesla-at-pupman-dot-com]
 > Sent: Sunday, 4 January 2004 2:46 AM
 > To: tesla-at-pupman-dot-com
 > Subject: Re: Ballast
 >
 > Original poster: "claude masetto" <claudmas-at-optusnet-dot-com.au>
 >
 > Thanks Peter. This was the information I am looking for. I'm guessing it
 > will work just as good for 4x MOTs. I see by your email address that you
 > are
 > in Australia. So am I. Whereabouts are you. I am in Sydney.
 > Thanks
 > Claude.
 > ----- Original Message -----
 > From: "Tesla list" <tesla-at-pupman-dot-com>
 > To: <tesla-at-pupman-dot-com>
 > Sent: Saturday, January 03, 2004 10:58 AM
 > Subject: RE: Ballast
 >
 >
 >   > Original poster: "Peter Reid" <peter-at-reidconsulting-dot-com.au>
 >   >
 >   > Claude,
 >   >
 >   > I think that may have been me; however I am using it to run 6 MOT's
 >   > instead of 4 :) . The details are on my webpage.
 >   > http://tesla.reidconsulting-dot-com.au, if you want any more information
 > let
 >   > me know.
 >   >
 >   > Regards
 >   >
 >   > Peter Reid
 >   >
 >   > -----Original Message-----
 >   > From: Tesla list [mailto:tesla-at-pupman-dot-com]
 >   > Sent: Saturday, 3 January 2004 5:44 AM
 >   > To: tesla-at-pupman-dot-com
 >   > Subject: Ballast
 >   >
 >   > Original poster: "claude masetto" <claudmas-at-optusnet-dot-com.au>
 >   >
 >   > Hello everybody,
 >   > A couple of weeks ago there was a posting on the list by somebody who
 >   > made a
 >   > ballast and was using it  series with 4 MOTS. I think the core was
 > made
 >   > from
 >   > welding rods. I'm trying to track down this design information as I
 >   > believe
 >   > it works well, so if anybody can help it would be much appreciated.
 >   > Thanks
 >   > Claude.
 >   >
 >   >
 >
 >