[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Secondary winding frustration



Original poster: dhmccauley-at-spacecatlighting-dot-com 


 > I'm attemping to wind a 3.75 od acrylic tube with 19" of 36
 > awg (175 tpi/~3300 turns according to my wire table).

3300 turns is much too high.  Your wire losses as this point, especially
with the 36 AWG wire, will be much too high.
I suggest using a larger diameter wire and maybe 1400 turns maximum.

Dan