[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Another SRSG phase adjuster question



Original poster: "steve" <steve_vance-at-cablelynx-dot-com> 

Hi coilers,

I just got done building john's srsg phase adjuster.
I am getting a 6 volt resonate voltage rise across the
motor with the variac set at half. Anywhere else the voltage
is lower but not lower than the line voltage.The problem is I am
only getting about 45 degrees adjustment on my rotor.
Is this because I am using a 1800 rpm motor?

Steve Vance