[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Static gap.



Original poster: "Jim Lux" <jimlux-at-earthlink-dot-net> 


----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Friday, February 20, 2004 4:46 PM
Subject: Static gap.


 > Original poster: "Luke" <Bluu-at-cox-dot-net>
 >
 > Looked around the archives and have not found any reference to what is the
 > preferred length of a static gap.
 > I am not referring to the gap distance.
 > If a static gap is set up with copper tubes parallel to each other what
 > would be the preferred length to make these?

I think it's whatever fits.. Mine are 2" long, but that's just because that
was a convenient length when I was chopping them on the saw.

 >
 > Any one have thoughts on this?
 >
 > Thanx
 >
 > Luke Galyan
 > <mailto:Bluu-at-cox-dot-net>Bluu-at-cox-dot-net
 > http://members.cox-dot-net/bluu
 >
 >
 >