Re: MONSTER 100kW VTTC - Building now!

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: dhmccauley-at-spacecatlighting-dot-com 

There are two EIMAC 4CW100000 type tubes.

The meter is an X-Ray sniffer.

Dan



 > Dan, out of curiosity, what type of tubes (specs) and
 > type of circuit does this beast utilize?
 >
 > Also, BTW, what kind of meter is that in the guys hand?
 >
 > David Trimmell
 >
 > On Fri, 20 Feb 2004 13:39:49 -0700, "Tesla list" wrote:
 >
 >  >
 >  > Original poster: "Mccauley, Daniel H"
 >  > <daniel.h.mccauley-at-lmco-dot-com>
 >  >
 >  >
 >  > Heres a picture of the HV switch / load.
 >  >
 >  > http://users.snip-dot-net/~liche/hvload.jpg
 >  >
 >  > Dan
 >  >
 >  >
 >  >
 >  > If we get a giant brown-out we'll know your testing!
 >  > cul brian f.
 >  >
 >  > ----- Original Message -----
 >  > From: "Tesla list" <tesla-at-pupman-dot-com>
 >  > To: <tesla-at-pupman-dot-com>
 >  > Sent: Thursday, February 19, 2004 11:20 PM
 >  > Subject: MONSTER 100kW VTTC - Building now!
 >  >
 >  >
 >  >   > Original poster: dhmccauley-at-spacecatlighting-dot-com
 >  >   >
 >  >   > I have officially set off to build possibly the
 >  > highest power VTTC
 >  > ever  > made.  We have a newly acquired pulse load /
 >  > switch at work that
 >  > is capable  > of switching at up to 100kHz and peak
 >  > power levels up to
 >  > 200kW peak. (about  > 30kW continous)  Its designed to
 >  > pulse some Lambda
 >  > 45kV (30kW) switching  > power supplies as a burn-in
 >  > test, but i'm
 >  > thinking of building a huge  > primary coil
 > (solenoid?)
 >  > and using this
 >  > thing to drive it.  >  > Could be interesting . . .
 >  >
 >  > > Dan  >  >  >
 >
 >
 >
 >
 >