RE: MONSTER 100kW VTTC - Building now!

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: humanb-at-chaoticuniverse-dot-com 

Dan, out of curiosity, what type of tubes (specs) and
type of circuit does this beast utilize?

Also, BTW, what kind of meter is that in the guys hand?

David Trimmell

On Fri, 20 Feb 2004 13:39:49 -0700, "Tesla list" wrote:

 >
 > Original poster: "Mccauley, Daniel H"
 > <daniel.h.mccauley-at-lmco-dot-com>
 >
 >
 > Heres a picture of the HV switch / load.
 >
 > http://users.snip-dot-net/~liche/hvload.jpg
 >
 > Dan
 >
 >
 >
 > If we get a giant brown-out we'll know your testing!
 > cul brian f.
 >
 > ----- Original Message -----
 > From: "Tesla list" <tesla-at-pupman-dot-com>
 > To: <tesla-at-pupman-dot-com>
 > Sent: Thursday, February 19, 2004 11:20 PM
 > Subject: MONSTER 100kW VTTC - Building now!
 >
 >
 >   > Original poster: dhmccauley-at-spacecatlighting-dot-com
 >   >
 >   > I have officially set off to build possibly the
 > highest power VTTC
 > ever  > made.  We have a newly acquired pulse load /
 > switch at work that
 > is capable  > of switching at up to 100kHz and peak
 > power levels up to
 > 200kW peak. (about  > 30kW continous)  Its designed to
 > pulse some Lambda
 > 45kV (30kW) switching  > power supplies as a burn-in
 > test, but i'm
 > thinking of building a huge  > primary coil
(solenoid?)
 > and using this
 > thing to drive it.  >  > Could be interesting . . .
 >
 > > Dan  >  >  >