[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Series connection of Mosfets/IGBTs

To: tesla-at-pupman-dot-com
Subject: Re: Series connection of Mosfets/IGBTs
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Mon, 16 Feb 2004 12:04:40 -0700
In-Reply-To: <BAY9-DAV48uExDYdjcJ000087fb-at-hotmail-dot-com>
References: <6.0.0.22.2.20040213122320.02461fc8-at-twfpowerelectronics-dot-com><BAY9-DAV48uExDYdjcJ000087fb-at-hotmail-dot-com>
Resent-Date: Mon, 16 Feb 2004 12:10:10 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <MEYIO.A.ZZE.KWRMAB-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: Terry Fritz <teslalist-at-twfpowerelectronics-dot-com>

Hi,

I have looked into this some.  It seems just too expensive since you need 
to isolate the FETs (IGBTs) and there are so many.  Random files are at:

http://hot-streamer-dot-com/TeslaCoils/MyCoils/SolidStateCoil/

Cheers,

         Terry


At 10:28 PM 2/15/2004, you wrote:
>Dear forum members,
>
>I have seen parallel connection of MOSFETs to increase the load current
>capability.
>Anybody in this forum tried series connection of MOSFETs/IGBTs and increase
>the supply voltage to greater than 2KV ?

References:
- Re: Looking for a Transformer
  - From: "Tesla list" <tesla-at-pupman-dot-com>

Prev by Date: Re: ebay caps
Next by Date: Re: ebay caps
Prev by thread: Re: Looking for a Transformer
Next by thread: Need drawings for Powerstat variac . . .
Index(es):
- Date
- Thread