Re[2]: XFMR Connection Question

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: Mike Poulton <mpoulton-at-mtptech-dot-com> 

Tesla list Wrote:
 > Original poster: "Rajesh Seenivasan" <rajeshkvs-at-hotmail-dot-com>

 > Greetings,

 > I have 3 ferrite cored transformers.
 > primary rating- 220V peak to peak, 5Amps
 > turns ratio- 1:10

Ferrite cored? As in, the high-frequency neon power supplies? Are
these just the transformers, or the entire power supplies? Either way,
they can't effectively be combined in series or parallel without a bit
of work. Each transformer will need to be driven separately. If these
are complete power supplies, then that's fine -- otherwise you need to
build a switching converter around each individual transformer.
Second, the outputs will need to be rectified individually and then
connected in parallel (series is not a good option due to insulation
breakdown).

-------------------------------------------------
Mike Poulton
MTP Technologies
mpoulton-at-mtptech-dot-com
KC0LLX (70cm AM ATV, 33cm/12cm FM ATV, Omaha, NE)