RE: Transformer OK for a Coil? (mot coil)

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Steve Conner" <steve.conner-at-optosci-dot-com> 

 >It would take a bit of engineering, but it's possible.

I've built a single MOT coil too, using two stacked voltage doublers driving
a DC resonant charging circuit. This gave a final charging voltage of 20kV
for the tank cap. It worked fine (1kW, 40" sparks) but it was a bit
expensive to buy all the caps and diodes for the voltage multiplier, and it
took a long time to solder them all together. It would probably be cheaper
just getting 4 MOTs, or going with one of the two MOT/two cap circuits Greg
Hunter built.

http://www.scopeboy-dot-com/tesla/tc2schem.html

Steve C.