[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Transformer OK for a Coil? (mot coil)

To: tesla-at-pupman-dot-com
Subject: Re: Transformer OK for a Coil? (mot coil)
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Sun, 08 Feb 2004 15:59:06 -0700
Resent-Date: Sun, 8 Feb 2004 16:06:18 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <2RD7-C.A.buE.iDsJAB-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: Bob81818-at-aol-dot-com 

Would anyone mind telling me some insight on how hard it would be to use a 
single MOT for a coil? or any thing different, I'm sure there would be much 
different, with the ballast and all. I've only made a coil with an NST, so 
I dont have any experience with mot's at all. I know its going to be a 
small coil, but could someone who made one of these give me some specs or a 
web site to go to. Thanks all in advance!
        Dan

Prev by Date: Re: Single-bushing 14.7kV pigs. Thoughts?
Next by Date: Re: Single-bushing 14.7kV pigs. Thoughts?
Prev by thread: Dr. Resonance?
Next by thread: Re: Transformer OK for a Coil? (mot coil)
Index(es):
- Date
- Thread