Re: Secondary form coating.

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Harold Weiss" <hweiss-at-new.rr-dot-com> 

Hi Luke,

Sounds like an interesting idea.  I think that varnish penetrates better,
unless coated while winding. (messy)

David E Weiss

 > Original poster: "Luke" <Bluu-at-cox-dot-net>
 >
 > Has anyone ever used Plasti Dip for a secondary coil form coating (under
 > the wire)?
 > Plasti Dip is that liquid rubber in a can you coat tool handles etc. with.
 >
 > Does it insulate well enough?  There are areas I would like to use it in.
 > My form is already coated in Glytol.  But in the future thought Plasti Dip
 > might work.  The rubbery consistency might allow the wire to sink into it
a
 > bit as it is wound.  This might help reduce the amount of air trapped
below
 > the wire and between windings.
 >
 > Thoughts??????
 >
 > Main question though, does it insulate well enough?
 >
 > Luke Galyan
 > Bluu-at-cox-dot-net
 >
 >
 >
 >