Re: JavaTC and Coil Design

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Virtualgod" <mike.marcum-at-zoomtown-dot-com> 

I would say turns if you are going for length. If nothing else, just make a
bigger diameter secondary to accomodate everything (except maybe spark to
secondary size ratio).

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Tuesday, February 03, 2004 7:36 AM
Subject: JavaTC and Coil Design


 > Original poster: G <bog-at-cinci.rr-dot-com>
 >
 > Hello All,
 >
 > I have been running some numbers on JavaTC for a new coil design, and have
 > run into a slight problem. I am having trouble satisfying a secondary
 > winding ratio of 4.5:1 or 5:1 with Malcom's recommendation of a wire 6
skin
 > depths thick, and with John Freau's recommendation of 1200-1500 turns.
Does
 > anyone have thoughts on which of these are most critical to satisfy?
 >
 > Thanks,
 > Gregory
 > --
 > "Without ZIM, I am lost."
 > GeekID#-1229
 > http://thegeekgroup-dot-org
 >
 >
 >