[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: MOT core

To: tesla-at-pupman-dot-com
Subject: RE: MOT core
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Tue, 03 Feb 2004 05:43:09 -0700
Resent-Date: Tue, 3 Feb 2004 05:52:23 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <7k0l4D.A._9.-i5HAB-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Philip Chalk" <phil-at-apsecurity-dot-com.au> 



-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com]
Sent: Tuesday, 3 February 2004 1:58 AM
To: tesla-at-pupman-dot-com
Subject: Re: MOT core

Original poster: "Richard W." <potluckutk-at-comcast-dot-net>

Actually decreasing the core cross-section by half will drop the power
capability almost by a factor of 4.



........ Because 2 squared is almost 4 !

Prev by Date: Primary Winding (Strip vs Tube
Next by Date: RE: SSTC bridge driver
Prev by thread: Re: MOT core
Next by thread: Re: MOT core
Index(es):
- Date
- Thread