[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: new coil
- To: tesla@xxxxxxxxxx
- Subject: RE: new coil
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Tue, 14 Dec 2004 08:02:07 -0700
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Tue, 14 Dec 2004 08:10:16 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <EFn1QC.A.y1G.WJwvBB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Rich" <rdjmgmt@xxxxxxxxxx>
Picture are easy, I can take good pictures but the workmanship on the
Terry Filter below is outstanding
Rich
Here is a way "too" beautiful one!! I wish I could just take the
"pictures" half that good ;-))
http://www.peninsulators.org/Tesla/nstfilt1.jpg
http://www.peninsulators.org/Tesla/nstfilt2.jpg
But just use old bolts or bent wire for the safety gaps. You just want
it
to arc over if the voltage on the NST starts to go way too high.