[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: 18,000. AMP high energy Cap bank
- To: tesla@xxxxxxxxxx
- Subject: Re: 18,000. AMP high energy Cap bank
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Sun, 12 Dec 2004 07:25:00 -0700
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Sun, 12 Dec 2004 07:28:02 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <ILWjuC.A.VyC.oVFvBB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Daniel McCauley" <dhmccauley@xxxxxxxxxxxxxxxxxxxxxxxxxx>
Should be enough for your time travel machine needs.
> Original poster: "Mike" <mike.marcum@xxxxxxxxxxxx>
>
> How many joules is that?
>
> Mike
> ----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
> To: <tesla@xxxxxxxxxx>
> Sent: Saturday, December 11, 2004 9:31 PM
> Subject: 18,000. AMP high energy Cap bank
>
>
> >Original poster: "Gary Weaver" <gary350@xxxxxxxxxxxxx>
> >
> >FOR SALE
> >
> >Does anyone have an interest in this capacitor bank. I have 3 capacitors
> >connected in parallel. The capacitors weigh about 100 lbs each. Caster
> >oil fill caps. Rated 18,000. AMP High Energy pulse capacitors. 3
> >capacitors in parallel is 54,000. AMPS. It comes with a power supply
and
> >high voltage transformer that is used to charge the caps.
> >
> >This thing is DANGERIOUS. I make spark gaps out of 1/8" solid steel
wire.
> >The wires are 3 feet long each. I connect the wires to the large
terminals
> >and bend them in a large loop about 4 foot diameter in size. I set the
> >spark gap to about 1 inch. I tie a 100 foot long kite string to one of
the
> >spark gap wires. I then plug in my 100 foot cord and let the capacitor
> >bank charge. It takes a few seconds for it to get fully charged. It
> >pulls a heavy load while it is charging the lights in the house get dim
for
> >a whole. When the lights in the house come back to full brightness I
know
> >the cap bank has stopped charging. I unplug the extension cord. Then I
> >pull on the kite string to close the spark gap. "BOOM" The discharge
> >sounds like a high powered rifle. The flash looks 100 times brighter
than
> >an arc welder. It vaporizes both wires.
> >
> >A friend from the airport gave me a 5000 watt flash lamp. It was used
but
> >still worked. The airport maintenance replaces the lights after a
certain
> >number of hour before it burns out. I discharged the cap bank through
the
> >flash lamp and it completely vaporized the lamp. There was nothing left
> >but a burned spot on my driveway.
> >
> >I ran a piece of #24 copper wire to the street and back again a distance
of
> >150 ft. I discharged the cap bank through the wire. It looked and
sounded
> >like setting off 150 ft of demolation det cord.
> >
> >I have never used these caps for a tesla coil. I have always wondered if
> >there is a way to make the cap bank discharge through my tesla coil like
> >one huge lightin bolt. It would probably vaporize the tesla coil.
> >
> >Gary Weaver
> >
> >
>
>
>
>
>
>
>