Re: AWG 10 magnet wire sources?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Yurtle Turtle" <yurtle_t-at-yahoo-dot-com> 

You may find enough quarter shrinking list members
here or in the HV list that you could try a small bulk
buy. I'd be in for some AWG 10 and 12.

Adam

--- Tesla list <tesla-at-pupman-dot-com> wrote:

 > Original poster: "Jim Lux" <jimlux-at-earthlink-dot-net>
 >
 > Oddly, MWS is probably a mile from where I live...
 > And, of course, they have
 > every magnet wire known to mankind, but for AWG10
 > they have a 10 pound
 > minimum.. about $100, sales tax and shipping
 > included.  I was looking for a
 > few feet (for a matching network) and cast my bread
 > upon the waters.
 >
 > The next challenge will probably be the high current
 > RF capacitors (we've
 > already got the water cooled cold plate, etc.)
 >
 >
 > This brings up an interesting topic that I will post
 > separately...
 > ----- Original Message -----
 > From: "Tesla list" <tesla-at-pupman-dot-com>
 > To: <tesla-at-pupman-dot-com>
 > Sent: Thursday, July 29, 2004 9:53 AM
 > Subject: Re: AWG 10 magnet wire sources?
 >
 >
 >  > Original poster: Terry Fritz
 > <teslalist-at-twfpowerelectronics-dot-com>
 >  >
 >  > You may want to consider square 10ga. magnet wire
 > like MWS makes.  I don't
 >  > have any around here.  You could get it in silver
 > too.  But a fan is
 > cheaper...
 >  >
 >  > Cheers,
 >  >
 >  >          Terry
 >  >
 >  >
 >  > At 11:24 PM 7/28/2004, you wrote:
 >  > >It's for an RF inductor in an existing power
 > combiner design and
 > dimensions
 >  > >and thermal properties are critical. It's
 > handling several kilowatts  at
 >  > >13.6 MHz. (I'm sure Terry has seen the
 > design..it's from the DEI folks)
 >  > >Before we blow up the transistors in our own
 > design at 5 MHz, we want to
 >
 >
 >