RE: THOR Bang energy vs. streamer length measured

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Denicolai, Marco" <Marco.Denicolai-at-tellabs-dot-com> 

Hi Steve,

I have a DC SMPS charging the primary capacitor and some logic
synchronizing the charge with the electrode position. I just didn't
design this logic to allow for a charge cycle every second electrode
presentation. If I had, I could halve the BPS without touching the RSG
disk electrode set or its rotation speed.

Best Regards

 > Marco, if you switch to DC resonant charging using a SPDT
 > spark gap (i.e.
 > add a second set of stationary gaps to your RSG, charge the
 > primary cap through one set of gaps, discharge it into the
 > primary coil through the other set of gaps), then you can
 > reduce your BPS to be as slow as you wish without power
 > arcing or other premature discharge effects.
 > --Steve Y.