Re: AWG 10 magnet wire sources?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "S&JY" <youngsters-at-konnections-dot-net> 

Jim,

Besides motor rebuild shops, consider using the thin plastic insulated house
wire (e.g. THHN or THWN) available at Lowes, Home Depot, etc.  The
insulation isn't much thicker than enamel and might serve your purpose.
--Steve Y.

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Wednesday, July 28, 2004 7:04 AM
Subject: AWG 10 magnet wire sources?


 > Original poster: "Jim Lux" <jimlux-at-earthlink-dot-net>
 >
 > I'm looking for a source for AWG 10 magnet wire.  Any kind of insulation
is
 > fine, but some coating is needed.  Probably only need 30-50 feet of the
 > stuff (it's for an RF matching network).
 >
 >
 >