Re: AWG 10 magnet wire sources?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "David Rieben" <drieben-at-midsouth.rr-dot-com> 

Hi Jim,

Try your local electric motor and/or transformer rebuild shop.
They will usually sell you wire at their cost and for no more
than your needing this would be your best bet.

David R.

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Wednesday, July 28, 2004 8:04 AM
Subject: AWG 10 magnet wire sources?


 > Original poster: "Jim Lux" <jimlux-at-earthlink-dot-net>
 >
 > I'm looking for a source for AWG 10 magnet wire.  Any kind of insulation
is
 > fine, but some coating is needed.  Probably only need 30-50 feet of the
 > stuff (it's for an RF matching network).
 >
 >