Re: My SSTC!

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Kreso Bukvic" <kreso.bukvic-at-kc.htnet.hr> 

BTW. I didnt adjust for 50-50 squarwave so the driver whas quite instable.
Then i tried to adjust it! It is gone out of control !!! 40 cm sparks. I
cannot belive it. And still no dead mosfets.

I cannot wait to replace 14 A fets with 30 A IGBT-s and remowe more and more
primary turns!

Could sombody actualy tell me what does that 10 ko pot do? Is there a way to
incorporate a antena on this design, im not using the tunning method that
shifts the frequency down, except that the driver shematics is identical to
this.

http://www.richieburnett.co.uk/sstc01.gif

Halfbridge SSTC-s rule ;-).

And it would newer be possible to build this SSTC without Terry Fritz
affcourse ;-).

Best Regards

Kreso Bukvic
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Friday, August 13, 2004 3:44 PM
Subject: Re: My SSTC!


 > Original poster: "Kreso Bukvic" <kreso.bukvic-at-kc.htnet.hr>
 >
 > Well i meant that in the sarcastic way. I failed to get working SSTC,
until
 > i discarded the Steves designs and started working with Richies.
 >
 > These was not anything regarding your coils. I meant that in the way of
how
 > newer my SSTC does not want to work and now it works perfectly.
 >
 > Sory if i insulted sombody, i didnt mean it.
 >
 > Im changing the name of this topic
 >
 > Best Regards
 >
 > Kreso Bukvic
 > ----- Original Message -----
 > From: "Tesla list" <tesla-at-pupman-dot-com>
 > To: <tesla-at-pupman-dot-com>
 > Sent: Friday, August 13, 2004 12:59 AM
 > Subject: RE: SSTC battle continues!
 >
 >
 >  > Original poster: "McCauley, Daniel H" <daniel.h.mccauley-at-lmco-dot-com>
 >  >
 >  >
 >  > SSTC battle continues?   8cm ? ?   A joke perhaps?
 >  >
 >  > My DRSSTC I puts out over 200cm.
 >  >
 >  > Steve Ward's puts out over 300cm.
 >  >
 >  > Jimmy Hynes puts out over 200cm.
 >  >
 >  > Again, 8cm?  The battle continues ? ? ?
 >  >
 >  > Am I missing something?
 >  >
 >  >
 >  >  >Sparks are ~8 cm long at half rectified and no toroid.
 >  >
 >  >  >IS there a way to improwe the sparklength more?
 >  >
 >  >  >I doubt remowing primary turns would works since primary gets HOT?
 >  >
 >  >  >Any comments?
 >  >
 >  >  >Best regards
 >  >
 >  >  >Krešo Bukvi
 >  >
 >  >
 >  >
 >  >
 >
 >
 >
 >