Re: phase conversion

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: Bart Anderson <classi6-at-classictesla-dot-com> 

I don't think your missing anything Malcolm. All that is achieved is a 
multitap transformer, no phase difference.

Take care,
Bart

Tesla list wrote:

>Original poster: "Malcolm Watts" <m.j.watts-at-massey.ac.nz>
>On 30 Mar 2004, at 17:15, Tesla list wrote:
>
> > Original poster: "Christopher 'CajunCoiler' Mayeux"
> > <cajuncoiler-at-cox-dot-net>
> >
> > I did such a configuration as class project,
> > one year.   The scale was small, but it did
> > the trick.  It was essentially a pole-pig
> > simulator, so that the new guys could try
> > their hand at delta, open-delta, and wye
> > secondary connections, without endangering
> > some very expensive REAL pigs.
> >
> > The transformers in the simulator were
> > 100VA isolation units, but it shouldn't be
> > TOO much different on a larger scale.
> >
> > Here's the way I wired them...
> > http://www.msbdatasystems-dot-com/sim_Y.jpg
> > http://www.msbdatasystems-dot-com/sim_D.jpg
>
>As far as I can see, there is no phase difference between the
>outputs. Am I missing something??
>
>Malcolm
>
>
>
>