RE: phase conversion

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Christopher 'CajunCoiler' Mayeux" <cajuncoiler-at-cox-dot-net> 

I did such a configuration as class project,
one year.   The scale was small, but it did
the trick.  It was essentially a pole-pig
simulator, so that the new guys could try
their hand at delta, open-delta, and wye
secondary connections, without endangering
some very expensive REAL pigs.

The transformers in the simulator were
100VA isolation units, but it shouldn't be
TOO much different on a larger scale.

Here's the way I wired them...
http://www.msbdatasystems-dot-com/sim_Y.jpg
http://www.msbdatasystems-dot-com/sim_D.jpg


 > -----Original Message-----
 > From: Tesla list [mailto:tesla-at-pupman-dot-com]
 > Sent: Tuesday, March 30, 2004 12:18 PM
 > To: tesla-at-pupman-dot-com
 > Subject: phase conversion
 >
 >
 > Original poster: Matt <fox-at-woozle-dot-org>
 >
 > I seem to remember a post some time about being able to get three pahse
 > power from single phase power by wiring up 3 or 4 transformers in some
 > fashion. I have looked high and low but can not seem to find it. maybe i'm
 > just out of my mind? can someone please point me in the correct direction?
 >
 > -matt
 >
 >
 >