Re: sphere within a sphere

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Christoph Bohr" <cb-at-luebke-lands.de> 

Hello Bill, all

Yes, I wonder if the buyer was someone here on the list... or the seller.
Are you out there?!

I checked the specs, too and my abilities to "brain-simulate" what will
happen in this circuit are limited. But to me it simply seems like a
magnifying transmitter with two parallel driver units or one symetrical
driver unit...
However, this is different from Teslas own plan ( is this veryfied, is this
a genuine drawing from tesl? ). I find it hard to believe, that tesla
himself drew a plan that has such an obvious error in it. But on the other
hand, maybe I just do not understand it right and it can work this way.
Maybe this has something to do with teslas idea to exite the earth rather
than the air for sending power through the globe or for any earth rosonance
experiments.
I am by far not a tesla expert and maybe some statements above are
completely wrong and / or I mixed up some fiction and truth about tesla. I
have to admit this is sometimes hard to decide with a genuis like tesla...

The other thing is his construction. It is indeed very beautiful and looks a
lot like it came right from 100 Years ago.
The statement on the site concerning the toroid / sphere question seems to
be only referning to the shielding ablilities.
To build such a sphere should not be too critical for someone with machine
shop or enough money ( spells "not me" ).

Maybe I will find time to practicaly investigate this, but I think some of
the more experienced coilers on the list will be faster with that.

Best regards

Chistoph


----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Tuesday, March 23, 2004 2:50 PM
Subject: Re: sphere within a sphere


 > Original poster: "teri mckenney" <mck-at-ezy-dot-net>
 >
 > Hey Christoph,
 > I see the one on E-bay went for $112.50, wow! The spheres he sells on his
 > site are certainly cheaper, one would just have to build it himself.I
notice
 > that he says the toriod works better.He's using a 9/120 Franceformer with
 > two .01768uf caps and a rsg set at 3600 rpm with 4 electrodes.As a
 > woodworker I certainly appreciate the table he has it on.I like the
infamous
 > Owsley logo of the lighting bolt thru the skull on the carved leg .
 > Bill Mck.
 > ----- Original Message -----
 > From: "Tesla list" <tesla-at-pupman-dot-com>
 > To: <tesla-at-pupman-dot-com>
 > Sent: Monday, March 22, 2004 6:30 PM
 > Subject: Re: sphere within a sphere
 >
 >
 >  > Original poster: "Christoph Bohr" <cb-at-luebke-lands.de>
 >  >
 >  > Hallo all!
 >  >
 >  > Maybe I am late with what I found on the web some mintues ago, or
someone
 >  > else already posted this and I missed it....
 >  > However, I "googled" this out:
 >  >
 >  > http://www.tesla-coil-dot-org/Magnifier.htm
 >  >
 >  > This is explaining and disturbing as well, but definitely worth
reading.
 >  >
 >  > Best regards.
 >  >
 >  > Christoph Bohr
 >  >
 >  >
 >
 >
 >
 >