[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Homemade PCBs!
Original poster: Ed Phillips <evp-at-pacbell-dot-net>
Tesla list wrote:
>
> Original poster: "Jim Mitchell" <Electrontube-at-sbcglobal-dot-net>
>
> A layer is a flat piece of FR4 or other material that has the copper tracks
> in it. If you have a four layer board, each layer has a network of tracks
> in it, therefor allowing many tracks in a small X-Y sized board but with
> many layers.
>
> Regards - Jim Mitchell
Last week I attended a design review which included details of 32 layer
boards!!!!!!!! I couldn't believe it, but apparently true. Every other
layer was a ground plane, but still.............
Ed