Re: Epoxy doesnt work.

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "June Heidlebaugh" <rheidlebaugh-at-desertgate-dot-com> 

Eric: Gummy epoxy is bad epoxy or a bad mix. I have used many different
types of epoxy, some fresh and some years old from surplus sources. When a
batch is gummy you did not mix it well enough or your hardener is to old .
If you store your resin in sunlight it will age fast.
       Robert   H
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Monday, April 26, 2004 5:21 PM
Subject: Epoxy doesnt work.


 > Original poster: "Hydrogen18" <hydrogen18-at-hydrogen18-dot-com>
 >
 > Hi,
 >
 > I was trying to to epoxy the connections I made to my MOTs 0 volt side on
 > the HV. It doesnt seem to have worked. Even after 16 hours it is still
soft
 > in some situations and gummy in the others. Any1 know what the problem is?
 >
 >
<http://www.hydrogen18-dot-com/projectlogs/hivolt/4packmot/>http://www.hydrogen1
8-dot-com/projectlogs/hivolt/4packmot/
 >
 > ---Eric
 >
 >
 >