Re: Epoxy doesnt work.

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jim Mitchell" <Electrontube-at-sbcglobal-dot-net> 

If its 5 minute epoxy make SURE that you mix it VERY well or it wont work.

Regards - Jim Mitchell
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Monday, April 26, 2004 7:21 PM
Subject: Epoxy doesnt work.


 > Original poster: "Hydrogen18" <hydrogen18-at-hydrogen18-dot-com>
 >
 > Hi,
 >
 > I was trying to to epoxy the connections I made to my MOTs 0 volt side on
 > the HV. It doesnt seem to have worked. Even after 16 hours it is still
soft
 > in some situations and gummy in the others. Any1 know what the problem is?
 >
 >
<http://www.hydrogen18-dot-com/projectlogs/hivolt/4packmot/>http://www.hydrogen1
8-dot-com/projectlogs/hivolt/4packmot/
 >
 > ---Eric
 >
 >
 >