[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
circuit breaker and gif problem
Original poster: "Robert Hanford" <pomnept-at-comcast-dot-net>
Hello all,
To be brief, my coil is constantly either tripping its 20 amp circuit
breaker or the test/reset button on the outlet. This is only in the 30%
power tuning stage. It uses two 15/60 NSTs with a 160uf power factor
correction cap. I can't get it to run long enough to tune it properly.
If anybody has any ideas about this, I would really appreciate help. Prior
to upping the 15A ciruit breaker to 20A, and installing a GIF outlet, this
didn't seem as much of a problem.
Robert Hanford