[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Making paralleling chokes?????

To: tesla-at-pupman-dot-com
Subject: Re: Making paralleling chokes?????
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Fri, 23 Apr 2004 21:06:06 -0600
Resent-Date: Fri, 23 Apr 2004 21:09:19 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <zir-FB.A.MaE.cpdiAB-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: BunnyKiller <bunikllr-at-bellsouth-dot-net> 

depending on the choke core size    about 10-20 turns of the proper gage 
wire should do it for ya....   make all 3 chokes the same!!!


Scot D



Tesla list wrote:

>Original poster: "Randy & Lori" <rburney6-at-comcast-dot-net>
>I need three chokes for my 1256Ds, and I have a real problem spending the 
>money for these things when I have what I need to make them.  What I don't 
>have is the turns ratio that I should use.  Anyone have a clue?
>
>

Prev by Date: RE: Treasure Hunting Tips (Junkyard, Scrap yard, etc.)
Next by Date: RE: IGBT SSTC finally possible?
Prev by thread: Making paralleling chokes?????
Next by thread: IGBT SSTC finally possible?
Index(es):
- Date
- Thread